FAQ jet powered electric motorized surfboard /jet boards
FAQ jet powered electric motorized surfboard /jet boards Maintenance How do I maintain the board after riding? 1. Take the board out of the water with the tail down. Keep tilted until the water completely dropped of the board; 2. Check the board, the battery, the mast, the propeller, the hall switch for any collision or damage. If there is damage or water leakage, please contact the jetfly technical support staff for assistance; 3. After use in seawater, please wash the board, pump-jet propulsion system, and driver with fresh water, and wipe dry with a towel; 4. Rinse the battery connector with fresh water. Do not flush the battery connector directly using a high pressure water hose; 5. Using air blower to blow dry the battery’s connector before charging. How do I do the further maintenance? 1. Using WD-40 to Clean the battery and the power module's connector periodically 2. Replace the O-rings on the power module's connector after 60~100 riding times. 3. Apply WD40 all the ex
